CT Tapping Saddles

AWIS Mains: CT TAPPING SADDLES

CT Tapping Saddles are suitable for Ductile Iron, Cast Iron, Steel, Copper, Asbestos Cement, PVC, PE and other types of pipes, which require a permanent BSP tapping offtake. They eliminate the need to “cut in” an offtake, as the saddle can be installed around the pipe without disrupting the internal flow, and Tapped Under Pressure.

MATERIAL SPECIFICATION & STANDARDS

C/T Tapping Saddles, are designed and manufactured under Quality Management
System, certificate to ISO9001:1994.

  • Body, Bolts, Nuts and Washers:  316 Stainless Steel 316 Stainless Steel ASTM A240M ASTM A240M
  • Sealing Gasket: Nitrile AS1646, AS/NZS 4020
  • BSP Tapping: 316 Stainless Steel, ATSM A312M, AS1722.1
  • Working Pressure: 1.6MPa. Working Temperature: 0 to 60 Degrees C.
Category:

Description

CT Tapping Saddles are suitable for Ductile Iron, Cast Iron, Steel, Copper, Asbestos Cement, PVC, PE and other types of pipes, which require a permanent BSP tapping offtake. They eliminate the need to “cut in” an offtake, as the saddle can be installed around the pipe without disrupting the internal flow, and Tapped Under Pressure.

CT Tapping Saddles are constructed from 316 Stainless Steel and have a fully line rubber mat designed to insulate the pipe
and protect it from galvanic corrosion.

The Tapping Saddle, seal is specially design, It incorporates a static seal and a dynamic lip seal. Also incorporated into the seal is an internal stainless steel retaining ring, which prevents the seal and mat from extruding out, under extreme internal pressure.

The specially designed seal allows for pipe outside diameter changes, caused by pressurizing and depressurizing of the pipe.

MATERIAL SPECIFICATION & STANDARDS

C/T Tapping Saddles, are designed and manufactured under Quality Management
System, certificate to ISO9001:1994.

  • Body : 316Stainless Steel S ASTM A240M
  • Bolts, Nuts and Washers: 316Stainless Steel ASTM A240M
  • Sealing Gasket: Nitrile AS 16456 AS/NZS 4020
  • BSP Tapping:316 Stainless Steel, ATSM A312M, AS1722.1
  • Working Pressure: 1.6MPa. Working Temperature: 0 to 60 Degrees C
DN Pipe Pipe OD Range (mm) Code BSP Tapping
X (mm)
80 75-100 CT2-75-100 X X 20 & 25
80 88-108 CT2-88-108 X X 32, 40 & 50
100 110-135 CT2-110-135 X X 20 to 50
100F 122 CT2F-122 X X 20 to 50
125 135-160 CT2-135-160 X X 20 to 50
150 160-190 CT2-160-190′ X X 20 to 50
150F 177 CT2F-177 X X 20 to 50
175 190-220 CT2-190-220 X X 20 to 50
200 210-240 CT2-210-240 X X 20 to 50
200F 232 CT2-232 X X 20 to 50
225 240-270 CT2-240-270 X X 20 to 50
225F 259 CT2-259 X X 20 to 50
250 270-300 CT2-270-300 X X 20 to 50
250F 286 CT2-286 X X 20 to 50
275 300-330 CT2-300-330 X X 20 to 50
300 330-360 CT2-330-360 X X 20 to 50
300F 345 CT2-345 X X 20 to 50
350 360-390 CT2-360-390 X X 20 to 50
375 390-420 CT2-390-420 X X 20 to 50
400 420-450 CT2-420-450 X X 20 to 50
425 450-480 CT2-450-480 X X 20 to 50
450 490-520 CT2-490-520 X X 20 to 50
Disclaimer: While every effort has been made to ensure that the information in this brochure is correct and accurate. Users of AWIS Australia Pty Ltd provided product or information within this document must make their own assessment of suitability for their particular application. Product dimensions are nominal only, and should be verified if critical to a particular installation. No warranty is either expressed, implied, or statutory made by AWIS Australia Pty Ltd Products unless expressly stated in any sale and purchase agreement entered into between AWIS Australia Pty Ltd and the

We are the manufacturers, We can fabricate, to your councils Water Authorities requirements.
Just call for a quote.

There are no reviews yet.

Be the first to review “CT Tapping Saddles”

Your email address will not be published. Required fields are marked *

Related products