Junior Half and Full Clamps

AWIS Mains:

316 SS Junior Half and Full Clamps

Junior Half Clamps: Used for repairing pin-hole breaks in small diameter pipes. They provide a quick, easy and cost effective solution for this type of pipe break. The Half Clamps are available in sizes to suit galvanized pipe from 15mm to 100mm.
Junior Full Clamps: The Junior Full Clamp provides a quick, easy and cost effective solution for repairing larger pipe breaks in smaller diameter pipes by providing a full circumferential seal around the pipe. Available in sizes to suit galvanized or Copper pipe from 15mm to 38mm

MATERIAL SPECIFICATION & STANDARDS
316 SS Repair Clamps are designed and manufactured under Quality Management System, certificate to ISO9001:1994.

  • Body : 316Stainless Steel S ASTM A240M
  • Bolts, Nuts and Washers: Electro galv
  • Sealing Gasket : Nitrile AS 16456 AS/NZS 4020
  • Working Pressure: 1.6MPa. Working Temperature: 0 to 60 Degrees C
Category:

Description

AWIS Mains: 316 SS Junior Half and Full Clamps

Junior Half Clamps: Used for repairing pin-hole breaks in small diameter pipes. They provide a quick, easy and cost effective solution for this type of pipe break. The Half Clamps are available in sizes to suit galvanized pipe from 15mm to 100mm.

Junior Full Clamps: The Junior Full Clamp provides a quick, easy and cost effective solution for repairing larger pipe breaks in smaller diameter pipes by providing a full circumferential seal around the pipe. Available in sizes to suit galvanized or Copper pipe from 15mm to 38mm.

MATERIAL SPECIFICATION & STANDARDS
316 SS Repair Clamps are designed and manufactured under Quality Management System, certificate to ISO9001:1994.

  • Body : 316Stainless Steel S ASTM A240M
  • Bolts, Nuts and Washers: Electro galv
  • Sealing Gasket : Nitrile AS 16456 AS/NZS 4020
  • Working Pressure: 1.6MPa. Working Temperature: 0 to 60 Degrees C
Junior Clamps Full circle Gasket to suit Galv Pipes
Nominal Size mm Outside Diameter mm Part No Length Mm
15 21.3 CFW15mmG-3 75
15 21.3 CFW15mmG-6 150
20 26.7 CFW20mmG-3 75
20 26.7 CFW20mmG-6 150
25 33.4 CFW25mmG-3 75
25 33.4 CFW25mmG-6 150
32 42.2 CFW32mmG-3 75
32 42.2 CFW32mmG-6 150
Junior Clamps Half gasket To suit Galv Pipe
Nominal Size mm Outside Diameter mm Part No Length Mm
15 21.3 CFC-084-02 75
15 21.3 CFC-084-06 150
20 26.7 CFC-105-03 75
20 26.7 CFC-105-06 150
25 33.4 CFC-132-03 75
25 33.4 CFC-132-06 150
32 42.2 CFC-160-03 75
32 42.2 CFC-160-06 150
40 48.3 CFC-190-03 75
40 48.3 CFC-190-06 150
50 60.3 CFC-238-03 75
50 60.3 CFC-238-06 150
65 73 CFC-300-03 75
65 75 CFC-300-06 150
75 88.9 CFC-350-06 75
75 88.9 CFC-350-06 150
100 114.3 CFC-450-03 75
100 114.3 CFC-450-06 150
Junior Clamps Full Circle Gasket to suit Copper
Nominal Size mm Outside Diameter mm Part No Length Mm
15 12.7 CFW15mmC-3 75
15 12.7 CFW15mmC-6 150
20 19.05 CFW20mmC-3 75
20 19.05 CFW20mmC-6 150
25 25.4 CFW25mmC-3 75
25 25.4 CFW25mmC-6 150
32 31.75 CFW32mmC-3 75
32 31.75 CFW32mmC-6 150
40 38.1 CFW40mmC-3 75
40 38.1 CFw40mmG-6 150
Disclaimer: While every effort has been made to ensure that the information in this brochure is correct and accurate. Users of AWIS Australia Pty Ltd provided product or information within this document must make their own assessment of suitability for their particular application. Product dimensions are nominal only, and should be verified if critical to a particular installation. No warranty is either expressed, implied, or statutory made by AWIS Australia Pty Ltd Products unless expressly stated in any sale and purchase agreement entered into between AWIS Australia Pty Ltd and the

We are the manufacturers, We can fabricate, to your councils Water Authorities requirements.
Just call for a quote.

There are no reviews yet.

Be the first to review “Junior Half and Full Clamps”

Your email address will not be published. Required fields are marked *

Related products